iSMA-B-LP-H

Wall panel with 2,6" LCD display, touch buttons for changing parameters, power supply 24V AC - built in temperature and humidity sensors
£156.00

iSMA-B-LP-H is a room unit with 2.3” LCD display and four function buttons.  Additionally, the room unit has the built-in temperature and humidity sensors.

iSMA-B-LP-H is powered with 24 V AC/DC and has the built-in RS485 port (Modbus RTU/ASCII and BACnet MSTP).  Use of open communication protocol allows to connect the room unit with any controller supporting Modbus RTU/ASCII or BACnet MSTP.  Together with iSMA-B-FCU controller, the room unit allows to change the basic parameters such as: temperature setpoint, fan speed, FCU mode and others.

Thanks to built-in USB port, there is possibility to firmware update and room unit configuration without the necessity of power supply.  iSMA-B-LP has the modern design and is available in different colours (white is basic) on client request.

Specification
Temperature sensor
  • Type: 10k NTC
  • Range: 0 – 50°C
  • Accuracy: +/- 0,5°C
  • Resolution: +/- 0,1°C
Humidity sensor
  • Range: 0-100% RH
  • Accuracy: +/- 2% RH in range 20 – 80% RH
  • Resolution: +/- 1% RH
Communication
  • 2x RJ 12 terminal (RS485 half duplex)
  • Baud rate: 2400 to 115200 bps
  • Protocol: Modbus, BACnet
  • MINI USB, Type B
Platform
  • ARM Cortex – M0+
Housing
  • Dimension: 100x123x27 mm
  • Construction: plastic, self-extinguishing (PC/ABS)
  • Wall mounting (standard electric box)
  • Cooling: internal air circulation
Environment
  • Operating temperature: 0°C to 50°C
  • Storage temperature: -40°C to 85°C
  • Relative humidity: 5% to 95%, no condensation
  • Ingress Protection Rating: IP20
  • For indoor installation
Power supply
  • 24 V AC/DC

  Datasheet

  Installation Instruction